Outdoor places with a great deal of activity like airports, delivering ports, highways, combining expressways, transportation terminals, and also sports fields usually need high pole lights because they need extra safety and security. High mast led lights is really cost-effective and is the best way to illuminate large outdoor spaces that require top quality light.
High mast led lights are high illumination poles with lighting fixtures connected on top aiming downwards to the ground. The illumination poles are normally 30 meters high and also the illumination components are typically mounted at an elevation of 60-120 feet. A solitary lights pole might have 4, 6, or 8 lighting fixtures. In some instances, the illumination poles might have in between 10 and also 16 lights.
Illuminating large areas isn’t simple and also high poles usually require extremely powerful lights.
In days passed, most high pole lights included high stress sodium bulbs. But these lights have high maintenance prices (as a result of their short life expectancies), take in a lot of electricity, and also take a long period of time to warm up as well as cool. This is why LEDs were such a welcome adjustment. They entirely changed the method high poles illuminate big spaces.
Here are some points you must always keep in mind when it comes to high pole illumination.
Point the Light to the Right Place
No doubt about it, illuminating a large area requires a great deal of accuracy. One of the most essential thing to think about when lighting a large exterior space is not the amount of light created by the bulbs, but where the light goes. There’s no need to set up lights with a high lumen output if a lot of the light will go into the skies as well as the ground below will certainly be improperly lit.
LEDs are directional lights, which implies they produce light in a particular range and also do not distribute everything over the place like high intensity discharge lights. They have many diodes with specific optics and also discharge light evenly across surface areas. Because HID lights are omni-directional, they need to be made use of with reflectors which guide the light where it is required. However, reflectors are never 100% efficient and up to 30% lumens can be shed throughout the reflective procedure.
LED lights do not trigger glare and their optics focus the light generated by the LED chips where it is needed. Optics regulate the illumination pattern by supplying narrower light beam angles.
If your high poles utilize traditional lights systems, you may need to tilt them to guide the light to a specific location. Traditional lights additionally have the propensity to create glow as they develop really intense spots straight below them.
Progressively, LEDs are replacing traditional lights in high poles made use of in huge applications such as commercial sites as well as auto parking zones. They are additionally replacing the old lighting systems used in sports fields– which need lights with high lux levels and also no flicker in order for TV cameras to capture everything plainly.
Color Temperature Is Important
Color Temperature is a number that defines the shade of light emitted by a light. Low numbers are used for warm lights with red and also orange tones (2700K-3000K) while high numbers are made use of for cool lights with white and blue shades (3000K-5500K and also over).
Conventional illumination systems have low shade temperature levels and emit light with an orange radiance that makes it difficult for individuals to recognize the details of autos in a vehicle parking area, containers in a delivery port, or foreign things debris (FOD) in a flight terminal.
LEDs have high color temperatures and release bright white light which discloses truth colors of items. The light they create does not create eye strain as well as allows individuals to perform their jobs easily.
Think of Light Maintenance
One of the most significant drawbacks of HID pole lights is that they need a great deal of maintenance. The lights have a life-span of 15,000-25,000 hours, which suggests electrical experts need to replace them often– a procedure that can be labor-intensive and time-consuming, thinking about just how high the lights usually are.
In most instances, when HID lights are being changed the ballasts should also be replaced, which adds to the overall maintenance expenses.
HIDs also have an extremely high ratio of lumen devaluation as well as shed a lot of their lumens prior before they reach completion of their life-spans.
As a matter of fact, by the time they reach fifty percent of their lifetimes, they may have lost half of their lumens. Their deterioration procedure is also not a simple one as they begin to shift colors as they get to the end of their lifespans.
Electrical experts normally need to transform out the bulbs as soon as their performance lowers as many outside locations with high mast lights need maximum lighting.
LEDs have lengthy lifespans (50,000 to 100,000 hrs), maintain 70% of their lumens for their entire lifetimes, do not utilize ballasts, and also don’t shift shades as they age. The lights are generally maintenance-free, the only maintenance that may need to be done is cleaning the fixtures.
The Lighting Controls to Be Paired With the Lights
One important point we commonly neglect is how much power we can conserve by just lowering lights or turning them off when they are not needed.
High intensity discharge lights do not collaborate with the majority of illumination controls as they take a lot of time to heat up. In case of a power outage, you need to give them time to cool down before you can change them on once again.
On the other hand, LEDs function well with dimmers, motion sensors, photo-sensors, occupancy sensors, along with timer switches. You can pair your LED high masts with lights controls to change them on and also off or lower them according to the need.
New generation LEDs come with different controls and also appropriate for big locations where high-powered lights with controls are needed. LED controllers give you the flexibility to control the illumination, the lights impacts, and also the color levels of LED lighting. One area where LED high mast lights with controls can be installed is in flight terminal tarmacs. The lights can be installed between 2 tarmacs as well as a controller can be used to switch on the lights for the particular tarmac being used.
Cut Costs by Switching to LED
If you own or manage an area with high mast lights, you should seriously consider upgrading to LED. High Mast led lights can be easily installed on the existing fixtures and instantly reduce energy consumption. They will also offer many other benefits and help you to get back the money you invested in a short period of time.
The great thing about LEDs is that you can spread their weight evenly on a mast and their lenses will focus the light exactly where it needs to go. However, conventional luminaries may have to be placed on one side of a mast to illuminate a specific area– which may create an unequal load.
MFG has a variety of High Mast led lights Solutions that are suitable for different types of high masts. We also offer different combinations based on the lighting requirements of your outdoor space .
Lighting High Mast Need The Uniformity For Better Coverage
The best high mast pole design and high mast lighting system should take the uniformity into consideration. It is the ratio between Emin/Emax. The highest uniformity is 1. However, we seldom meet this dates because of inevitable light scattering and different angle of the luminaries. Lighting uniformity of 0.7 is high because this is also for professional standard.
Why do we need to high uniform illumination? It is because the uneven bright would cause eye fatigue, and it might be dangerous with the lower bright. We high mast lighting manufacturer provide you with free high mast tower design to make sure the best high mast lighting system for you.
2）Without Lighting pollution
The lights are not all in the right place but there is useless light wasted in the sky, and affects neighbors. That is lighting pollution.
To solve this issue, Green Tech high mast lights come with precise optical system that direct the lights onto the designated areas to reduce light loss. As we said “Lighting up your field, not your neighbors’ yard”. 3)Anti-glare Glare must be<50 for high mast stadium lights. Green Tech Lighting adopted with secondary optical design, with the customized optics direct light onto the field, it can minimize glare from shining into the eyes of athletes.
Color rendering is the way to measure if a light source can display object colors sensibly and obviously or not. A high CRI means that objects colors seen under that light are very close to the color as it would be seen under ideal or natural light.
The CRI of Green Tech Led high mast stadium lights is CRI80+/90+, thus the TV and HDTV broadcasting can capture the best moments.
5)Advanced heat sink
If the junction temperature of the Led lights>212℉ (100℃), lights brightness will fall so quick,and lifespan also will be reduced. Green Tech Led high mast lighting has advanced heat dissipation technology, junction temperature<149℉ (65℃), heat energy is at least 10 times quicker than traditional lamp. So lifespan is guaranteed>80,000hours , if the lights working 5 hours per day, Green Tech lighting can working for 43 years.
6)Security is guaranteed
Because the high mast is installed for outdoor, and it will face with all kinds of weather. If the lights fallen down and hurt people or cards, how dangerous it will be! So security must be guaranteed.
A.WATERPROOF For outdoor football stadium, IP65 is required at least. Green Tech passed IP65 and IP66 waterproof.
B.ANTI-CORROSION If the high mast lighting is installed near sea or where with high content of salts, thus it will corroded the lights heavily, and the screw may be loosed.Green Tech use aluminum alloy housing, even the material of each screw is stainless steel , we will aslo do it with electrophresis and powder-painted treatment, make it real anti-corrosion.
C.WIND RESISTANCE There are many levels of wind speed, for outdoor lights, wind resistance is the main factor when design the lights and high mast pole. Green Tech Led high mast lighting can resist 17 level hurricane, it will be very stable in such high speed.
7)Long Lifespan, zero maintenance cost High mast is around 50foot -150foot, it is extremely troublesome and cost high because of frequent repairing metal halides. Therefore, the high quality and longer lifespan of lights must be ensured. The lifespan of Green Tech LED lights is above 80000 hours. If it is used for 5 hours a day, the lights can continue to be used for 43 years, one time installation while zero maintenance cost in the future.
5.Why Replace Metal Halide Lamp To Green Tech Lighting Led High Mast Lighting
Except from the above 7 advantages, replacing to Green Tech Led high mast lighting can save lots of your cost. Let’s take the electrical cost as an example,we will assume the following:
Cost of electricity: .12 kw/h Hours of operation: 12 hours a night Number of days run each year: 365
Key Features Of LED High Mast Light 1. 1016 aviation aluminum alloy, 304 stainless steel, anti-corrosion material design. 2. With superior 4D cooling system provides multiple levels of protection 3. High output, light efficiency up to 160lm/w with advance optical technology. 4. IP66 weather-tight housing&system 5. Intelligent dimming system. 0-10V, 1-10V and DALI dimming models are available.
As the professional manufacturer of Led high mast lighting, Green Tech Lighting can provide One-Stop Service including lights, high mast, cables, etc, yon’t need to take risks and waste too much time to find supporting facilities.
New Generation LED waterproof driver- The XLG family. Compares to the HLG series, XLG series is designs as an economical version AC/DC LED drivers with compact size and high efficiency (up to 90%). XLG family covers a power range of 25W to 240W, with its innovative design which improves surge protection level (Line-Earth: 6KV and Line-Line: 4KV).
What is a solar parking lot light?
A solar parking lot light is one type of light source that is fully powered by solar energy. It’s consist of the LED parking lot light, solar panel, battery, controller, and another component. The solar panel collects energy to charge a rechargeable battery during the day, then the battery provides energy to the fixture during the night. They come in a large variety of shapes and sizes with optional features such as motion sensors and remote controls.
HelloPlease log in